The AGC 150 Generator (Genset), AGC 150 Mains, and AGC 150 BTB controllers provide flexible protection and control in a wide range of applications.
In the simplest applications, you can use one AGC 150 Generator controller to control one genset. You can also use AGC 150 Generator controllers for CANshare load sharing by multiple gensets (without power management).
Several AGC 150 controllers can work together to make a power management system (PMS). These applications include synchronisation, island operation, and running parallel to mains. The PMS can automatically start and stop gensets, and open and close breakers. You can also use AGC 150 in power management systems with other DEIF controllers.
The AGC 150 Generator controller contains all the functions needed to protect and control a genset and the genset breaker. If you do not use power management, the controller can also protect and control the mains breaker.
The AGC 150 Mains controller protects and controls a mains breaker and a tie breaker.
The AGC 150 BTB controller protects and controls a bus tie breaker. The PMS manages the busbar sections.
The AGC 150 is a compact, all-in-one controller. Each AGC 150 contains all necessary 3-phase measuring circuits.
The values and alarms are shown on the LCD display screen, which is sunlight-readable. Operators can easily control the gensets and breakers from the display units. Alternatively, use the communication options to connect to an HMI/SCADA system. The HMI/SCADA system can then control the plant.